Beautiful & Unusual Classical Guitars - Episode 6: 'C3' Michael Greenfield

Soundport + Stunning wood = Beautiful sound and aesthetics for days.

Introduction

Michael Greenfield has been in the business of making guitars for over 20 years and playing them for twice as long! After servicing and restoring many instruments he decided to setup shop professionally in the 1990s. The experience that he gained through repairing older instruments provided Michael with an insight into what makes great guitars great but also what makes certain guitars fail. After many years of careful study Michael has set out to improve upon the guitar and make instruments that are truly worthy of the concert stage. 

Flawless view of the back & sides of this glorious instrument.

Specifications

• Offset soundhole
• Secondary soundport
• Asymmetric & elongated fan bracing
• Elevated fingerboard
• 21 frets
• Scale length - 655mm

Check out the elevated fretboard...a player's dream!

How you can get one!

Michael Greenfield is an exclusive luthier and his instruments do not come cheap. With a base price of US$10,500 for the GF Acoustic Model it is a major purchase. All other models (including the C3 pictured here) start at US$14,500! Start saving...

• Michael Greenfield

Be sure to check out my articles on Modern Classical Guitar Design to learn more about elevated fretboards, soundports, lattice bracing etc etc:

Part 8: Fanned Frets

Part 7: Arched back

Part 6: Double Tops

Part 5: Lattice Bracing

Part 4: Armrest

Part 3: Soundport

Part 2: Indented Cutaway

Part 1: Elevated Fingerboard

Modern Classical Guitar Design Part 8: Fanned Frets

A stunning Alto 11-string guitar by Neris Gonzalez (Bartolex).

Introduction

Guitars with additional strings are nothing new. From the earliest days of the lute instruments that resembled guitars have always been around. However, recently guitars with more than 6 strings in the classical guitar realm have started to gain in popularity. In electric guitar circles Steve Vai is probably heralded as leading the renaissance in multi-stringed or extended range guitars even though they existed well before he burst onto the scene in the early 80s. 

It was Ibanez that took up the challenge of designing a 7-string guitar that could meet Mr. Vai's demands. It would seem that the desire to have an extended range on guitar crossed over into the classical scene too. You may be thinking to yourself that Narcisco Yepes had already been playing an 11 string for many years and that is true however his instrument was extremely rare and those guitars weren't truly adopted into mainstream classical guitar. 

'Angled bridge' on a Stoll guitar.

What does this have to do with Multi-scale/Fanned fret classical guitars?

However, I digress. What does all of this have to do with fanned frets? Well, the thing is this - the more strings you add onto a guitar the greater the chances are that the intonation will become worse and worse. Bass strings need extra tension or they become 'floppy' and almost unplayable. The way to circumvent this is to make the length of the string longer i.e. the distance from the bridge nut to the neck nut should be increased the problem is you can't really do that to the treble strings otherwise they'll break or the tension will be so tight that you won't be able to play them. 

Solution!

Enter the 'fanned fret' or 'multi-scale' system. Smart luthiers out there realised that if they could angle the frets, bridge, & neck nuts outwards from the treble strings they could increase the length of the bass strings whilst retaining the same or very similar scale length on the treble strings. Here's an example from Salvador Cortez guitars:

A wonderful example of 'angled bridge & nut' with the multi-scale frets in place. Pic courtesy of Salvador Cortez.

Wouldn't this be hard to play?

The simple answer is no! Think about the natural 'angles' that your fingers take when you place them on guitar...our fingers naturally splay outwards and upwards and this perfectly mirrors what is taking place on a fanned fret guitar. The result is a guitar that actually feels perfectly natural to play. 

Looking for a classical guitar with Fanned Frets?

Here is a list of luthiers that are making multi-scale classical guitars:

• Stoll guitars 
•  Tom Bills 
• Michael Greenfield (think Andy McKee)

Should you have one?

If you are planning on moving into extended range classical guitar playing then it should definitely be a consideration although strictly speaking it isn't a necessity. The most important thing is that it works well with you - not for you. The guitar as much as possible should be a natural extension of you. It should feel comfortable sitting in your lap and comfortable for your hands and fingers. 

Check out my other Modern Classical Guitar Design articles

Part 9: Reinforced Carbon Fiber Neck

Part 7: Arched back

Part 6: Double Tops

Part 5: Lattice Bracing

Part 4: Armrest

Part 3: Soundport

Part 2: Indented Cutaway

Part 1: Elevated Fingerboard

Modern Classical Guitar Design Part 7: Arched Back

A beautiful example of an 'arched back' classical guitar by Theo Sharpach.

Introduction

Classical guitars have been around in their present form for circa 200 years. Since that time their design has been an ongoing, constant, breathing topic. Unlike many other instruments from that time the design of classical guitars and guitars in general hasn't stopped evolving. Many luthiers are constantly striving to improve the design by making guitars easier to play, lighter & stronger with beautiful tones and aesthetics to match. 

One such design that has been gaining more ground over the past few decades is the 'arched back classical guitar'. 

Traditional Vs Arched

One of the best ways to describe the arched back of a classical guitar is to compare it to the traditional back which was for all intents and purposes - flat. The picture below shows a traditional classical guitar design with a flat back.

Traditional guitar back by Zebulon Turrentine.

Pictured below is a wonderful picture clearly showing the arched back and its radically different style. 

A stunning example of an arched back guitar from Ziata guitars.

From the two pictures above it is very easy to see the aesthetic differences between the two designs. Yet perhaps the most important point to consider is the impact upon volume, comfort, and tonal difference that an arched-back designed guitar has compared to it's flat-backed predecessors.

A little bit of history

Arched back guitars have been around for at least 4 decades and have been used quite regularly in acoustic guitar design by famous makers such as Taylor and Guild. Their use and integration into production-model guitars by such well-known and respected guitar makers is a definitive sign that the design works and has been accepted by the guitar community at large. Classical guitar makers have been a bit slower to adopt the arched back design but it is definitely gaining momentum and acceptance by luthiers around the globe.

Pros & Cons

At the heart of the matter is sound and more so the quality of sound. Many guitar makers in recent years have been striving to make classical guitars that have more projection and are louder than the guitars of yesteryear. There is a school of thought out there that believe the beautiful lively tones of Ramirez & Hauser has been superseded & replaced by guitars that have volume but lack the beautiful and somewhat earthy and wild sound of older instruments. This of course if purely subjective and there are posits for both camps.

Let's look at the Pros

• Increased rigidity - similar to the strength of an arch in a building or bridge
• Focused - the parabolic shape is said to 'focus' the projection of the sound
• Raises the resonant frequency
• Increased sustain

A rare glimpse at an arched back with 'braceless construction'.

McKnight Guitars

Let's look at the Cons

• Heavier than a comparable flat back
• Tend to sound 'darker'
• Excess sustain can 'muddy' up the sound

Where can I buy one?

Here's a nice list of luthiers that are making braceless arched back classical guitars with great results:

• Jim Redgate
• Kris Barnett
• Theo Sharpach
• Michael Greenfield

I have to be honest and say that the only arch back guitars I've played have all been Ovation guitars (which is about as arched as it gets!) so I'm writing this article based upon testimonies of luthiers and players. Please leave a comment below and also check out my other articles on modern classical guitar design innovations.

Check out my other Modern Classical Guitar Design articles

Part 8: Fanned Frets

Part 6: Double Tops

Part 5: Lattice Bracing

Part 4: Armrest

Part 3: Soundport

Part 2: Indented Cutaway

Part 1: Elevated Fingerboard

Let your fingers fly!